0845 10 80 685

01403 700 794

Coral 10-Litre Metered Premier Eco Water Softener

Fountain / Coral
The latest technology in ECO technology, capacity and performance.
10 % Discounted Salt :
£ 643.75
£ 515.00
Product Info

Coral Premier Eco 10 Litre Metered Water Softener - Up to 4 people

Use the dropdown bar above to select softener and discounted install kit using latest technology in capacity performance.

7 Year parts warranty and all our Coral Water Softeners come with a FREE Extended 3 year Labour Warranty!

Our premier range of  softeners offers uprated performance enhanced flow rates through resin water saving reduce usage during regeneration which is found popular water save models.

The resin bed is the most vital part of the softener, using "Fine Mesh resin,from the world leading resin manufacturer. This has been developed in order to offer a uniform resin bead size which results in a resin that is highly efficient as well as being highly chlorine tolerant and due to the precision manufacturing process have increased softening surface area

Fine Mesh resin means that not only will you get longer life from the softener but also a better quality of water, allowing for faster flow rates and increased periods between regenerations. It is well known that with a standard resin it becomes more difficult to produce 100% soft water the closer the resin gets to its capacity, this is avoided with this range of units.

Offers an additional 10% soft water capacity between regenerations and up to 20% less pressure drop at high flow rates allowing flow of up to 70 litres per minute.

Uses block, tablet or granular salt.

Assembled and tested in the UK.

All prices shown include VAT and delivery to mainland UK. We are happy to ship worldwide, please see our shipping page for rates, or contact us on 0845 10 80 685 (local call rate) or 01403 700794.


Dimensions: H 530 x W 270 x D 460 mm.

Which Kit?

It is important that you select the correct installation kit to suit your pipework and hot water system in your property. This avoids any chance of the incorrect installation kit from restricting the flow. If you have conventional gravity fed, or indirect, system which has a cold water tank in the loft space and hot water cylinder, then the standard 15 mm kit would be suitable.

If you are still on 15 mm pipework but have a combination boiler, or direct type system, then you are better to go with the 15mm full flow installation kit. This has the benefit of using uprated fittings and connection hoses and ensures that you get a minimum of 15 mm bore through everything and therefore get no restriction on flow.

If you have 22mm pipework, then the best choice is the 22mm high flow install kit. This is found on the majority of houses less than 10 years old and is generally used on feeding mains fed unvented hot water systems If you are unsure, then please call us on 0845 10 80 685 or email for clarification.


Installation of you water softener - DIY or plumber?

Every softener comes complete with full installation instructions, these can also be found under the brochure tab. This allows for simple installation by a plumber or someone keen on DIY. If you are unsure, call us for clear impartial advice on 0845 10 80 685 (local call rate) or 01403 700794 or email us.



GUARANTEES AND SERVICE - Coral 10-litre Metered Premier Eco Water Softener

The owner of a Fountain Softeners water softener is protected by the following guarantees, which include the right to exchange or repair in the case of a manufacturer’s defect for up to:

7 Years Parts
3 Years Labour

The guarantees are under condition that the softener is installed according to local regulations and to the manufacturer’s instructions as well as the following:

1) It is very important that the water temperature of 50 centigrade for CW Series (cold water)and 65 degrees for HW Series (hot water) is never exceeded. 

2) There must always be suitable salt in the brine tank.

3) The electrical supply must never be switched off – electric units only

4) After a current break the electro timer must be re-adjusted (timer models only)

5) The inlet and outlet valves must always be open. The by-pass valve must always be closed.

6) The unit should be serviced every two years and is a condition of the 3 year extended partswarranty. 

7) If irregularities should occur, you would need to:-

Switch off the current
Close the inlet and outlet valves
Open the by-pass valve
Phone Fountain Softeners