Order your Denver Plus Electric Metered Water Softener is a new generation water softener system ideal for families up to 9 people. ✅ Order before 1pm for next day delivery (Mon - Sat).
This softener uses the Smart Soft LCD controller which offers ease of use combined with usage, flow and regeneration information.
Sliding salt tank cover for use with tablet salt.
The LCD controller can be remotely mounted from the softener for ease of programming and function displays
Denver 180 valve, electronic programmer and delayed regeneration. Connection 3/4” BSPM.
The cabinet has a built-in safety brine valve.
The equipment includes a softener mounted bypass for easy installation and servicing.
Built-in residual hardness mixer in the head.
Reliable and fast connection with locking clips.
Min. pressure: 2.5 bar.
Max. pressure: 6.0 bar.
Min. temperature: 4 ºC.
Max. temperature:: 35 ºC.
Power supply: 220 V – 12 Vac / 50 Hz.
Working flow: 40 l/minute
Peak flow: 50 l/minute
5 Year parts warranty and our premium Water Softeners come complete with a FREE Extended 3 year Labour Warranty!
Designed and tested in Europe.
All prices shown include VAT and delivery to mainland UK.
Width - 333mm
Height - 573 mm
Depth - 505 mm (approx 535mm with connections)
Which Installation Kit?
It is important that you select the correct installation kit to suit your pipework and hot water system in your property. This avoids any chance of the incorrect installation kit from restricting the flow. If you have conventional gravity fed, or indirect, system which has a cold water tank in the loft space and hot water cylinder, then the standard 15 mm kit would be suitable.
If you are still on 15 mm pipework but have a combination boiler, or direct type system, then you are better to go with the 15mm full flow installation kit. This has the benefit of using uprated fittings and connection hoses and ensures that you get a minimum of 15 mm bore through everything and therefore get no restriction on flow.
If you have 22mm pipework, then the best choice is the 22mm high flow install kit. This is found on the majority of houses less than 10 years old and is generally used on feeding mains fed unvented hot water systems. If you are unsure, then please call us on 0845 10 80 685 or email for clarification.
INSTALLATION KITS - MORE INFORMATION
Installation of you water softener - DIY or plumber?
Every softener comes complete with full installation instructions, these can also be found under the brochure tab. This allows for simple installation by a plumber or someone keen on DIY. If you are unsure, call us for clear impartial advice on 0845 10 80 685 (local call rate) or 01403 700794 or email us
GUARANTEES AND SERVICE
The owner of a Fountain Softeners water softener is protected by the following guarantees, which include the right to exchange or repair in the case of a manufacturer’s defect for up to:
5 Years Parts
3 Years Labour
The guarantees are under condition that the softener is installed according to local regulations and to the manufacturer’s instructions as well as the following:
1) It is very important that the water temperature of 50 degrees centigrade is never exceeded.
2) There must always be suitable salt in the brine tank.
3) The electrical supply to the Water Softener should be maintained 24 hours per day.
4) After a power outage the current time of day simply needs to be reset.
5) The inlet and outlet valves must always be open. The by-pass valve must always be closed.
6) It is recommended that the Water Softener is serviced every two years.
7) If irregularities should occur, you would need to:-
Isolate the power supply to the unit
Close the inlet and outlet valves and open the bypass valve
Contact Fountain Softeners customer services.