0845 10 80 685

01403 700 794

Duplex Commercial Water Softener 150-litre (1 inch)

In Stock
Flow 6m3/hr / Capacity 25.3m3 per vessel between regenerations
Max Flow Rate 6.8 m3/h
£ 2,058.00
2001g

The Duplex Metered Commercial Water Softener 150-litre (1 inch connections) that can accommodate a flow rate of 6 m/hour and a capacity of 25 m.

Duplex Softeners are designed to supply softened water in situations where a continuous and uninterrupted supply of softened water is required. These systems have two softening vessels and one brine tank.


There will always be one tank in service while the other tank is running a regeneration cycle or on standby, thereby guaranteeing 24/7 soft water production.

Typical applications are Hotels, Restaurants, Car Washes, Caravan Parks, and where the anticipated usage is not able to be estimated or may well increase during seasonal operations.

    Specification

    CW125 Duplex Metered Water Softener Specification:  


    Resin Volume :  150
    Vessel:  16x65"
    Flow : 6m3
    Peak Flow : 6.8m
    Capacity  @ 300ppm  25
    Valve Type  : WS1 TT
    Salt (kg) :22.5
    Valve Height (H1)  : 187mm
    Vessel Height (H2) : 1675mm
    Brine Tank Height (H3) : 1150mm
    Height to Inlet/Outlet (H4) : 1690mm
    Vessel Width (D1) : 406mm
    Brine Tank Width (D2) : 880mm (square)

    Diagram

    DUPLEX WATER SOFTENER

    Term used for a single vessel system, we supply industrial softeners that regenerate on either a time controlled basis or meter controlled for where the usage will tend to vary from day to day. Typical application are where the usage per day has been calculated and will not vary hugely, whilst not being required 24 hours per day.







     Tech Data & Manual
 
  •  
  •