0845 10 80 685

01403 700 794

Fountain Junior Electric Metered Water Softener

Fountain Softeners
In Stock
Suitable for families up to 4 people. 

*Order before 1pm for next day delivery (Mon - Sat) .*
Discounted Tablet Salt :
£ 499.50
£ 399.00
Product Info

The NEW Fountain Junior Electric Metered Water Softener is ideal where space is at a premium. Suitable for families up to 4 people. 

✅ Order before 1pm for next day delivery (Mon - Sat).

Our Fountain Junior Electric Metered Water Softener offers unbeatable results with simplicity of use. This softener uses the durable easy to use,  compact cabinet & innovative BNT control valve.  All you need to do is set the time and water hardness from the enclosed instructions and the unit takes care of itself. Suitable for a household of up to 4 people.

Easy programming with large LED display & intelligent regenerations based upon your water usage patterns.

Comes complete with softener mounted bypass for easy isolation of the softener for servicing as well as a blending valve to allow you to set the unit to your exact level of water softness to suit your preference.

5 Year parts warranty and our premium Water Softeners come complete with a FREE Extended 3 year Labour Warranty!

These systems are ideal where the daily/weekly usage can vary and will regenerate after a certain capacity of water has been used. Perfect for situations where there is a need for a high instantaneous flow such as power showers or multi bathroom houses.

Assembled and tested in Europe.

Designed for tablet salt but can be used with block or granular salt.

All prices shown include VAT and delivery to mainland UK. We are happy to ship worldwide, please see our shipping page or call us on 0845 10 80 685 (local call rate) or 01403 700794.


Width - 240mm 
Cabinet Height - front 300mm, back 330mm
Height -  515 mm inc Valve 
Depth - 435 mm (510mm with connections)

Installation Instructions & Video  

Which Installation Kit?

It is important that you select the correct installation kit to suit your pipework and hot water system in your property. This avoids any chance of the incorrect installation kit from restricting the flow. If you have conventional gravity fed, or indirect, system which has a cold water tank in the loft space and hot water cylinder, then the standard 15 mm kit would be suitable.

If you are still on 15 mm pipework but have a combination boiler, or direct type system, then you are better to go with the 15mm full flow installation kit. This has the benefit of using uprated fittings and connection hoses and ensures that you get a minimum of 15 mm bore through everything and therefore get no restriction on flow.

If you have 22mm pipework, then the best choice is the 22mm high flow install kit. This is found on the majority of houses less than 10 years old and is generally used on feeding mains fed unvented hot water systems.  If you are unsure, then please call us on 0845 10 80 685 or email for clarification.


Installation of you water softener - DIY or plumber?

Every softener comes complete with full installation instructions, these can also be found under the brochure tab. This allows for simple installation by a plumber or someone keen on DIY. If you are unsure, call us for clear impartial advice on 0845 10 80 685 (local call rate) or 01403 700794 or email us



The owner of a Fountain Softeners water softener is protected by the following guarantees, which include the right to exchange or repair in the case of a manufacturer’s defect for up to:

5 Years Parts
3 Years Labour

The guarantees are under condition that the softener is installed according to local regulations and to the manufacturer’s instructions as well as the following:

1) It is very important that the water temperature of 50 degrees centigrade is never exceeded. 

2) There must always be suitable salt in the brine tank.

3) The electrical supply to the Water Softener should be maintained 24 hours per day.

4) After a power outage the current time of day simply needs to be reset.

5) The inlet and outlet valves must always be open. The by-pass valve must always be closed.

6) It is recommended that the Water Softener is serviced every two years. 

7) If irregularities should occur, you would need to:-

Isolate the power supply to the unit
Close the inlet and outlet valves and open the bypass valve
Contact Fountain Softeners customer services.