- #Product Info#
Harveys Homewater 300 is a twin tank non-electric water softener, giving you unlimited softened water, using tablet salt and is suitable for standard and high-flow hot water systems.
The Homewater 300 is suitable for all types of households and hot water systems.
No power supply requires (meter controlled)
High quality British design and manufacture
Water pressure : 1-8 bar
Flow rate: 30 to 40litres / min
Inlet: ¾ bsp male
Outlet: ¾ bsp male
Salt storage capacity: 15kg
Dimensions: 250W x 485H x 440D mm
WHICH INSTALLATION KIT?
It is important that you select the correct installation kit to suit your pipework and hot water system in your property. This avoids any chance of the incorrect installation kit from restricting the flow. If you have conventional gravity fed, or indirect, system which has a cold water tank in the loft space and hot water cylinder,then the standard 15 mm kit would be suitable.
If you are still on 15 mm pipework but have a combination boiler, or direct type system, then you are better to go with the 15mm full flow installation kit. This has the benefit of using uprated fittings and connection hoses and ensures that you get a minimum of 15 mm bore through everything and therefore get no restriction on flow.
If you have 22mm pipework, then the best choice is the 22mm high flow install kit. This is found on the majority of houses less than 10 years old and is generally used on feeding mains fed unvented hot water systems. If you are unsure, then please call us on 0845 10 80 685 or email for clarification.
INSTALLATION KITS - MORE INFORMATION
Installation of your water softener - DIY or plumber?
Every softener comes complete with full installation instructions, these can also be found under the brochure tab. This allows for simple installation by a plumber or someone keen on DIY. If you are unsure, call us for clear impartial advice on 0845 10 80 685 (local call rate) or 01403 700794 or email us.
GUARANTEES AND SERVICE - HOMEWATER 300 WATER SOFTENER
The owner of a Fountain Softeners water softener is protected by the following guarantees, which include the right to exchange or repair in the case of a manufacturer’s defect for up to:
5 Years Parts
5 Years Labour On Site.
The guarantees are under condition that the softener is installed according to local regulations and to the manufacturer’s instructions as well as the following:
1) It is very important that the softener is sited in a frost free environment.
2) There must always be suitable salt in the brine tank.
3) For models requiring a power supply, ensure that is maintained and the time is correct.
4) The inlet and outlet valves must always be open. The by-pass valve must always be closed.
5) Our warranty does not cover faults due to water borne debris entering the softener or misuse.
6) If irregularities should occur, you would need to:
- Close the inlet and outlet valves
- Open the by-pass valve
- Phone Fountain Softeners
Click on the truck to see our Shipping page!