The Simplex Metered Commercial Water Softener is very economical when it comes to using salt and regeneration water.
This 125 litre metered softener will only regenerate when a pre-set volume of softened water has been used regardless of the number of days this takes. This avoids under or over regenerating of the softener when your water demand varies.
The volume of softened water is calculated by the hardness of your water supply, the capacity of the water softener and usage.
- Specification
CW125 Metered Water Softener Specification:
Resin Volume : 125
Vessel : 14 x 65"
Flow : 5.0m³
Peak Flow : 7.5m³
Capacity 20.8m³ @ 300ppm
Valve Type : WS1
Salt (kg) : 18.75
Vessel Valve Height (H1) : 1870mm
Connection Height (H2) : 1736mm
Brine Tank Height (H3) : 920mm
Vessel Width (D1) : 370mm
Brine Tank Width (D2) : 880mm (diameter)
- Diagram
SIMPLEX WATER SOFTENER
Term used for a single vessel system, we supply industrial softeners that regenerate on either a time controlled basis or meter controlled for where the usage will tend to vary from day to day. Typical application are where the usage per day has been calculated and will not vary hugely, whilst not being required 24 hours per day.
- Tech Data & Manual
