The Simplex Metered Commercial Water Softener is very economical when it comes to using salt and regeneration water.
This 75 litre metered softener will only regenerate when a pre-set volume of softened water has been used regardless of the number of days this takes. This avoids under or over regenerating of the softener when your water demand varies.
The volume of softened water is calculated by the hardness of your water supply, the capacity of the water softener and usage.
Choose from CW20, CW30, CW50, CW60, CW75 & CW100 Water Softeners depending on the required flow rate and soft water capacity.
Specification
CW75 Metered Water Softener Specification:
Resin Volume : 75
Vessel: 13x54"
Flow : 3.0
Capacity @ 300ppm - 12.5m3
Valve Type : 255/WS1
Salt (kg) : 12
Brine Tank Volume : 200 L
Brine Tank Width (B2) 670 mm
Brine Tank Height (H2) 830 mm
Vessel Width (B1) 325 mm
Vessel Height (H1) 1350 mm
Diagram
SIMPLEX WATER SOFTENER
Term used for a single vessel system, we supply industrial softeners that regenerate on either a time controlled basis or meter controlled for where the usage will tend to vary from day to day. Typical application are where the usage per day has been calculated and will not vary hugely, whilst not being required 24 hours per day.
Tech Data & Manual
