| | |
15mm Water Softener Installation kit.
- This kit includes all of the fittings that you need to install a water softener on a 15mm indirect (tank fed) system.
|
| | | |
Water softener 15mm installation kit.
- This kit includes all of the fittings that you need to install a Harveys Crown or Homewater 300 water softener on a 15mm indirect (tank fed) system.
|
|
| | | 15mm Full Flow Water Softener Installation kit.
- Water softener 15mm Full Flow installation kit, Ideal for houses with a Combination boiler, includes all of the fitting you need to install a water softener on a 15mm direct or indirect system.
|
| | | |
Water Softener 15mm full flow installation kit.
- This kit includes all of the fittings that you need to install a Harveys Crown or Homewater 300 water softener when you have a Combination Boiler.
|
|
| | |
22mm Water Softener Installation Kit
- This kit includes all of the fittings that you need to install a water softener on a 22mm direct or indirect system.
|
| | | |
22mm Installation Kit, including
- This kit includes all of the fittings that you need to install a Harveys Crown or Homewater 300 water softener on a 22mm direct or indirect system.
|
|
| | |
28mm (1") Full Bore Installation Kit.
- This kit includes all of the fittings that you need to install a water softener on a 28mm direct or indirect system.
|
| | | |
A pair of 15mm, straight x elbow, 12mm bore, stainless steel hoses- 1000mm long
- For use with Water softeners and Whole house filter systems.
|
|
| | |
A pair of high flow 22mm, straight x elbow, 19mm bore, stainless steel hoses- 800mm long.
- For use with Water softeners and Whole house filter systems.
|
| | | |
A pair of 1” bsp straight x elbow with 25mm bore stainless steel hoses- 800mm long
- For use with Water softeners and Whole house filter systems.
|
|
| | |
Water Hardness Test Kit
- Essential when configuring a water softener to determine the level of hardness in the incoming water supply. Also allows you to check existing softener performance.
|
| | | |
If you get a leak on your water softener, it could be excessive water pressure.
15mm compression at both ends make this pressure reducing valve fast to install.
- Set at 5 bar but can be adjusted with a slotted screw driver.
|
|
| | |
If you get a leak on your water softener, it could be excessive water pressure.
22mm compression at both ends make this pressure reducing valve fast to install.
- Set at 5 bar but can be adjusted with a slotted screw driver.
|
| | | |
This handy kit will safely leave your home leak free by capping off the inlet, outlet and drain connections when removing your softener.
- Full step by step instructions are supplied.
|
|
| | |
Water Softener Self Cutting Waste Kit - Suitable for all single tank softeners,
- For all Coral Softeners, CW20, CW30, Homewater 100 and Homewater 500.
|
| | | |
Water Softener Self Cutting Waste Kit - Suitable for twin tank softeners.
- For Crown and HW300 Water Softeners.
|
|
